1. Serpent S120 Link 1/12 pancar EP
(News/Latest)

Serpent S120 Link in brief The S120 Link  chassis consists of 2 main elements, the 2.5mm thick carbon fibre chassis plate and the rear aluminium motor pod. The chassis uses a Link-system , and is

2. Carpet Ripper 3.0 to be released soon!
(News/Latest)

...veral different tracks with good results and will be ready to production soon in few weeks. New CR 3.0 link car is designed and tested to be used with either 1S LiPo or 4cell NiMH. Note that despite...

3. Serpent S120 Link 1/12 pancar EP
(News/Latest)

Serpent 1/12 scale pancar S120 Link. All details to follow. Introduction planned for mid december 2009. CAD images:         Source: Serpent

4. Team Wave RB-50 & RB-30 speed controller
(News/Latest)

...ogrammer. The handheld programmer not only provide easy setup of the controller but also features a USB link. With updateable firmware, you can enjoy all new features later without paying extra  ...

5. Associated RC12R5
(News/Latest)

...The designers in Area-51 built the 12R5 on a 2.5mm woven carbon fiber chassis that utilizes a pivotball link rear suspension that allows for independent adjustments for chassis roll, bump and alignmen...

6. Speed Merchant Rev5 release
(News/Latest)

...-set some of the weight in the rear of the car. The biggest change on Rev5 is it new front end. The new link front end that was sturdy enough to hold up to the speeds and forces generated in today'...

7. Setup boards and Tweak Boards
(News/Latest)

.... Source: RedRC and Unity Tool Inc. Read more to see the pictures of this nice complete tweak board. (Links have been updated.) More information can be found on the Unity Tool Inc. web site.  ...

8. BMI RACING DB12R
(News/Latest)

...e the standard t-bar to connect the motor pod to the chassis but uses two l-bar that looks a lot like a link based car. The l-bar are placed where you normally would see in a link car the links. Using...

9. Team Speed Merchant
(Web Links / 12th scale manufacture)

The makers of the speedmerchant REV.4. It is linked based car using the old skool front end.

10. Calandra Racing Concepts
(Web Links / 12th scale manufacture)

...amkes the following cars for 12th scale: CRC Carpet Knife 3.2 and Team Red T-Fource. Carpet Knife is a link car as the T-fource is t-bar. ...