Search
Search Keyword front
Total 23 results found. Search for [ front ] with Google

Results 1 - 23 of 23
...conventional centrally mounted shock absorber together with a laterally mounted floating monoshock. The front end of the car is completely adjustable and utilises the now standard fixed lower suspens...
Wednesday, 07 April 2010

...centerline holes for optimum weight balance adjustment using HUDY Balancing Tool #107880  Composite front chassis protectors protect the front of the chassis in crashes  Robust body posts wi...
Tuesday, 23 December 2008

...rubber on traction required by some track conditions. A popular car setup is to use 36 mm rear and 38 mm front wheels.     Source: Corally Part# Item: ...
Tuesday, 02 December 2008

... conventional centrally mounted shock absorber together with a laterally mounted floating monoshock. The front end of the car is completely adjustable and utilizes the now standard fixed lower suspens...
Tuesday, 25 November 2008

5. Associated RC12R5
(News/Latest)
... turnbuckle wrench, making it easier and quicker to get dialed in. The 12R5's 'Active Strut' front end has been optimized, featuring symmetric components with adjustable caster and track w...
Saturday, 16 February 2008

6. Serpent S120
(News/Latest)
...20 lateral monoshock. Other innovations include a centrally mounted tweak adjuster as well as adjustable front suspension with independent upper a-arms and pivot ball mounted steering blocks. High qua...
Wednesday, 13 February 2008

New 1:12 Tire range – lilac (front) / magenta (front / rear): The new Team Corally lilac and magenta complete the range of Corally 1:12 tires for adjusting your 1:12 car to all carpet surfaces.
Saturday, 12 January 2008

...FEATURES: Fully equipped with super strong hardened black steel torx screws. The precision chrome steel front and rear wheel bearings offer long lasting, low rolling resistance and efficiency. Super...
Saturday, 12 January 2008

...s include performance proven CRC red anodized aluminum parts and Associated's race winning pro-strut front end kit. Holes are pre-drilled to allow the mounting of JR-3550, JR-3650, Hitec 225, KO-9...
Saturday, 17 November 2007

...Delrin plates to off-set some of the weight in the rear of the car. The biggest change on Rev5 is it new front end. The new link front end that was sturdy enough to hold up to the speeds and forces ge...
Monday, 24 September 2007

11. Vantomme M12
(News/Latest)
...n: 1)numerous chassis cut-outs 2)extreme small lower motor plate for easy access motor 3)a sharp X shape front design 4)a very short chassis with an extra bumper to attach 5)own designing using AutoCA...
Thursday, 20 September 2007

12. A.L.S front end
(News/Latest)
kimihiko-yano has this new A.L.S front end on sale on their web site. It is made of aircraft grade aluminum. It give you the possibility to adjust ride height with out placing shims to adjust the ride
Tuesday, 03 July 2007

13. Update SP12X WC front
(News/Latest)
...pe of 43 mm duraluminium turnbuckles (#79274) have been specially manufactured for use with the SP12X WC front suspension.   Source: Team Corally  ...
Tuesday, 26 June 2007

...nd toe out is possible. it comes with ball bearings which should give accurate results. * It works with front shafts of 1/8 inch size. CRC Generation X front shaft do not fit.    Source: RE...
Monday, 25 June 2007

...diameter then the standard wheels. They all come with single stage foams in the following shore rating: Fronts: Black-40 Magenta-32 Dbl Pink-35 Lilac-38 Purple-40 Rears: White-25 Yellow-30 Gray-35 P...
Thursday, 21 June 2007

16. Carpet Ripper 07 - Update
(News/Latest)
... has updated there site with some pictures of the Carpet Ripper 07. The kit comes without the rear axle, front end or t-bar assembly. Source: V-dezign ...
Tuesday, 05 June 2007

Corally finely released its new front end for the Corally SP12X that is based on the ASSO/CRC front end. Corally has always had it own type front but after they won the World Championship using a CRC
Friday, 18 May 2007

Corally release new US wheels white and foam donuts.  75813  1:12 Front Wheels –US Factory Wheels (1 pair)  75814  1:12 Rear Wheels –US Factory Wheels (1 pair) The
Thursday, 28 December 2006

... wheel system with double supported rear wheels for true and durable performance. Quick change front and rear wheels using special Corally clips. Lightweight Chassis (2.4 mm graphite)....
Tuesday, 19 September 2006

20. ENNETI 1-12 foam donuts
(News/Latest)
...s would do the job. I found some ENNETI 1-12 foam donuts with shore 25 for the rear and 42 shore for the front which you can order from the following shop DMModel . The first set of tires I added some...
Saturday, 12 August 2006

21. Corally Tire Shore Rating
(News/Latest)
...Pink tyres rear 1-12 30  ***   *****   *****   1412  Green tyres front 1-12         32  ***   ***** ...
Tuesday, 08 August 2006

22. Corally SP12X
(News/Latest)
...hich was red/silver. The new car looks a lot like the old SP12 but the car is totally different. The new front end suspension is totally new and the motor pod is a complete new design. The only design...
Thursday, 09 February 2006

23. Team Speed Merchant
(Web Links / 12th scale manufacture)
The makers of the speedmerchant REV.4. It is linked based car using the old skool front end.
Thursday, 10 August 2006

<< Start < Prev 1 Next > End >>

[ Back ]

Google AdSense

Tags Clouds

Web Hosting By REM Graphics Srl